Visit us at Commercial UAV Expo 2023, Booth 323!

September 5-7, 2023  | Las Vegas, Nevada, USA

 

Trimble Applanix is exhibiting at Commercial UAV Expo 2023!

Come see the Applanix DG set of OEM boards designed specifically for professional mapping with a UAV. Additionally, the latest version of POSPac UAV will be on display—come by and have a look!


View the New Trimble PX-1 RTX for Drone Delivery

UAV integration companies can now add precise positioning capabilities to their drones, so that delivery system operators can more efficiently plan and execute takeoff, navigation, and landing tasks. A small, lightweight GNSS-Inertial module with Trimble CenterPoint® RTX corrections, Trimble PX-1 RTX delivers consistent navigation without additional infrastructures.

Features:

  • Robust, centimetre-level continuous GNSS-inertial position with over-the-air Trimble CenterPoint® RTX Correction service
  • High accuracy True Heading from inertial – immune to environmental effects
  • Small, lightweight, triple-frequency, multi-constellation embedded GNSS-inertial hardware
  • Flexible as-a-service subscription (hardware included)

 

Skip the Line-Ups

Book a one-on-one meeting with an Applanix representative in advance, for expert advice on how our solutions can address your specific needs.  We’ll answer your questions, and direct you to the product most suited for you.

We look forward to seeing you there!

 

Book a one-on-one discussion with our on-site staff


What We're Showing

 

APX Family of OEM Boards

Direct Georeferencing for UAVs: APX and AP+ Air Family of OEM Boards 

Our GNSS-inertial technology is designed to reduce the cost and improve the efficiency of aerial survey from UAVs by Directly Georeferencing each point of sensor data without extensive GCPs (Ground Control Points) or flight line overlap.

Learn More about our Direct Georeferencing for UAV Solutions >

 

APX Family of OEM Boards

Applanix POSPac UAV

Applanix POSPac UAV is Applanix's next-generation, industry-leading software for Direct Georeferencing of mobile mapping sensors using GNSS and inertial technology specifically for UAV applications. POSPac UAV turns your UAV into a low-cost, highly efficient, professional-grade mapping solution compatible with cameras, LiDAR and other mapping sensors.

Learn More about Applanix POSPac UAV >

 

NEW! Introducing Applanix POSPac 9: Now with IN-Fusion+ Processing Mode & Tuned LiDAR QC Tools! 

Learn More about Applanix POSPac 9 >

 

Applanix POSPac PP-RTX

Applanix POSPac with Post-processed Trimble CenterPoint® RTX™ (PP-RTX)

Applanix POSPac PP-RTX is a cloud-based global GNSS correction service which utilizes Trimbles RTX technology to provide cm-level post-processed positioning accuracy without base stations. The Trimble RTX technology utilizes data from a dedicated global network of tracking stations to compute corrections to satellite orbit and clock information and atmospheric delay models. 

Learn More about Applanix POSPac PP-RTX >

 

NEW! Experience faster convergence time in global RTX regions now with IN-Fusion+ PP-RTX 2 Available with POSPac 9, this second generation of IN-Fusion+ PP-RTX has new signal compatibility with Beidou-III satellites to achieve less than 3-minute convergence times in Global regions. 

Read Whitepaper >

 

Applanix LiDAR QC Tools

Applanix LiDAR QC Tools

Applanix LiDAR QC Tools are a set of Applanix POSPac software tools that achieve the highest level of georeferencing accuracy with LiDAR sensors. Applanix LiDAR QC Tools support boresight calibration between IMU and LiDAR sensor, trajectory adjustment and LAS file point cloud generation. Depending on the license purchased it either supports boresight calibration and LAS file generation 

Learn More about LiDAR QC Tools > 

 

Applanix POSPac UAV Cloud

Applanix POSPac UAV Cloud & LiDAR QC Cloud

Applanix POSPac UAV Cloud is an online differential GNSS-aided inertial post-processing software for georeferencing data collected from cameras, LiDAR, and other sensors on Uncrewed Aerial Vehicles. An online version of Applanix’ industry-leading POSPac UAV desktop software, POSPac UAV Cloud is optimized for fixed-wing and rotary UAV platforms and compatible with various mapping sensors. Applanix POSPac UAV Cloud is available as an Application Program Interface (API) intended for Original Equipment Manufacturers (OEMs) to seamlessly integrate high accuracy Direct Georeferencing and trajectory refinement as part of the overall mapping workflow.

Learn More about Applanix POSPac UAV Cloud >

Is Applanix POSPac Cloud right for you? >

 

APX Family of OEM Boards

Trimble PX-1 RTX for Advanced Air Mobility: Precise Positioning as a Service

The Trimble PX-1 RTX is a small, lightweight GNSS-Inertial module that allows drone integration companies to add precise positioning as a service capabilities to their drone delivery systems so that operators can more efficiently plan and execute takeoff, navigation, and landing tasks. Trimble's positioning solutions provide unparalleled accuracy and performance, so your drone can navigate through whatever crosses its path.

Learn More about the Trimble PX-1 RTX >

 


 

Brochures and Datasheets